This 304 stainless steel stock sheet, measuring 0.090" x 38" x 29", is engineered for optimal performance in lubricating systems. Its superior corrosion resistance and durability ensure reliable operation in challenging industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.090" |
| Length | 38" |
| Width | 29" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, crucial for lubricating applications. With a precise thickness of 0.090 inches, a substantial length of 38 inches, and a width of 29 inches, it provides ample material for fabrication of components such as wear plates, guide rails, and housing for lubrication systems. The inherent properties of 304 stainless steel, including its excellent weldability and resistance to a wide range of chemicals and media, make it ideal for extended service life in environments prone to moisture, oils, and other lubricants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any manufacturing residues. 2. Cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate and install as per the specific design requirements of the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or burrs. | Employ sharp, dedicated metal cutting tools designed for stainless steel to ensure clean cuts and prevent edge damage. |
| Improper surface preparation before installation, leading to adhesion issues or premature wear. | Ensure all mating surfaces are free of contaminants, oils, and debris before assembly or welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear plates for conveyor systems, Guide rails for automated machinery, Components for oil and grease dispensing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||