This 0.070" thick, 17" x 21" 304 stainless steel stock sheet provides a robust and corrosion-resistant surface, specifically suited for demanding lubricating environments and applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.070" |
| Length | 17" |
| Width | 21" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a precise thickness of 0.070 inches, a length of 17 inches, and a width of 21 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance, high tensile strength, and non-magnetic nature, make it ideal for applications within lubricating systems, such as wear strips, guides, or protective barriers where friction reduction and material integrity are paramount. This sheet is engineered to withstand moderate to severe operating conditions, ensuring longevity and reliable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the 304 stainless steel stock sheet according to the design requirements. 3. Secure the sheet using appropriate fasteners (e.g., rivets, screws) ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive lubricating environments. | Always opt for corrosion-resistant materials like 304 stainless steel for lubricating applications exposed to moisture or chemicals. |
| Improperly aligning the sheet, leading to increased friction. | Precisely measure and align the stock sheet during installation to maintain optimal lubricating performance and minimize wear. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear strips in conveyor systems, Guide rails for sliding mechanisms, Protective liners for lubrication reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||