This 304 stainless steel stock sheet offers superior corrosion resistance and durability for lubricating system components. Precisely manufactured to 0.062" thickness, 33" length, and 30" width, it ensures reliable performance in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.062" |
| Length | 33" |
| Width | 30" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet meets rigorous industry standards for material integrity and dimensional accuracy. The 0.062" (1.57mm) thickness provides excellent strength and formability, while the 33" (838.2mm) length and 30" (762mm) width offer ample material for custom fabrication of bearing housings, wear plates, and guide rails within lubricating systems. Its inherent passivation layer offers exceptional resistance to rust, chemical attack, and galling, crucial for maintaining lubricant integrity and reducing friction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any manufacturing residues. 2. Cut to the required dimensions using appropriate metalworking tools. 3. Deburr all edges to prevent snagging and ensure smooth operation within the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using uncleaned material which can introduce contaminants into the lubricating system. | Always perform a thorough cleaning with an industrial degreaser and rinse with deionized water before installation. |
| Improper edge finishing leading to premature wear or damage to mating components. | Utilize a deburring tool or file to create a smooth, consistent radius on all cut edges. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing housing fabrication, Wear plate and guide rail manufacturing, Custom lubricant containment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||