This high-grade 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely manufactured to industry standards, it is ideal for fabricating custom suspending and bracing solutions across various industrial applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.060" |
| Length | 35" |
| Width | 43" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet boasts a critical thickness of 0.060 inches, providing robust structural integrity for demanding applications. Its 35-inch length and 43-inch width offer substantial material for fabricating custom components. The 304 alloy, known for its superior chromium and nickel content, delivers excellent resistance to oxidation and a wide range of corrosive media, making it suitable for environments where hygiene, chemical exposure, or outdoor exposure is a concern. This material's formability and weldability further enhance its utility in creating precise and reliable suspending and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the stock sheet to required dimensions using appropriate cutting tools for stainless steel. 2. Fabricate and form the sheet into the desired suspending or bracing component according to design specifications. 3. Securely fasten the fabricated component to the structural elements using compatible fasteners and approved methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and stain the stainless steel. | Always use 304 or 316 stainless steel fasteners to maintain corrosion resistance and prevent galvanic corrosion. |
| Improper cutting techniques causing excessive heat and potential material degradation. | Employ slow, controlled cutting speeds with adequate lubrication and cooling to prevent heat-induced damage to the stainless steel's protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom structural bracing in corrosive environments, Fabrication of specialized suspension systems for industrial equipment, Support structures in food processing and pharmaceutical facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||