Engineered for robust pneumatic systems, this 304 stainless steel stock sheet offers exceptional corrosion resistance and dimensional stability. Its precise specifications ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.114" |
| Length | 16" |
| Width | 20" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.114 inches (2.896 mm) in thickness, 16 inches (406.4 mm) in length, and 20 inches (508 mm) in width. Fabricated from AISI 304 (UNS S30400) austenitic stainless steel, it provides superior resistance to a wide range of corrosive media, including atmospheric conditions, many organic and inorganic chemicals, and food-processing environments. The material's excellent formability and weldability facilitate custom fabrication for complex pneumatic components, actuators, and enclosures, ensuring long-term integrity and operational efficiency. This sheet adheres to ASTM A240 standards for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general purposes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Clean the sheet surface thoroughly to remove any contaminants. 3. Fabricate and install according to approved engineering drawings and relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade materials in corrosive environments. | Always specify and use 304 stainless steel or higher for applications exposed to corrosive agents. |
| Improper cutting or forming leading to stress concentrations. | Employ appropriate tooling and techniques for cutting and forming stainless steel to avoid compromising material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic cylinder construction, Enclosures for pneumatic control panels, Custom fabricated pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||