This 304 stainless steel stock sheet provides superior corrosion resistance and durability, essential for robust pneumatic systems. Its substantial dimensions offer ample material for custom fabrication and demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.839" |
| Length | 20" |
| Width | 41" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.839 inches thick, 20 inches in length, and 41 inches in width. Composed of 18% chromium and 8% nickel, it offers excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for environments where hygiene, sanitation, and chemical inertness are paramount. Its high tensile strength and formability allow for precise machining and fabrication into complex pneumatic components, ensuring long-term operational reliability and safety in aggressive industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project requirements. 2. Prepare cutting and forming equipment to precise tolerances for 0.839" thick material. 3. Fabricate components following engineering drawings, ensuring clean edges and deburring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for high-pressure pneumatic lines. | Always adhere to the specified material thickness for structural integrity and pressure containment. |
| Inadequate cleaning of the stainless steel surface before welding or joining. | Thoroughly degrease and clean all surfaces to prevent contamination and ensure proper weld fusion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Cylinder Components, Air Valve Housings, Pneumatic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||