Engineered for demanding pneumatic systems, this 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity. Its precise dimensions and material properties ensure reliable performance in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.489" |
| Length | 46" |
| Width | 13" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet provides exceptional performance in pneumatic applications. Measuring 0.489 inches in thickness, 46 inches in length, and 13 inches in width, it meets stringent material specifications for 304 stainless steel, renowned for its excellent corrosion resistance, weldability, and durability. These attributes make it ideal for fabricating robust pneumatic components, enclosures, and structural elements subjected to aggressive media or demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate fabrication tools. 3. Fabricate and integrate the component into the pneumatic system, adhering to all relevant design and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a less corrosion-resistant material for pneumatic components exposed to moisture or chemicals. | Always select 304 stainless steel or a higher-grade alloy when corrosion resistance is critical in pneumatic systems. |
| Inadequate edge preparation during fabrication, leading to stress points or premature failure. | Ensure all cut edges are properly deburred and smoothed to prevent stress concentrations and ensure structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Cylinder Housings, Pneumatic Valve Manifolds, Pneumatic Control Enclosures, Custom Pneumatic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||