This robust 304 stainless steel stock sheet is engineered for high-performance pneumatic applications. Its substantial thickness and premium material ensure exceptional durability and resistance to corrosive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.693" |
| Length | 27" |
| Width | 34" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.693 inches in thickness, 27 inches in length, and 34 inches in width. The inherent properties of 304 stainless steel provide excellent corrosion resistance, crucial for maintaining the integrity of pneumatic components exposed to moisture, chemicals, or harsh atmospheric conditions. This material's non-magnetic nature and superior formability allow for precise fabrication of custom pneumatic enclosures, manifolds, and structural elements, ensuring reliable system operation and extended service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design specifications. 2. Prepare cutting and forming equipment according to material thickness. 3. Fabricate and install components, ensuring all connections are sealed to pneumatic standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments, leading to premature failure. | Always specify 304 or 316 stainless steel for pneumatic systems exposed to corrosive agents or high humidity. |
| Inadequate sheet thickness for expected pressure or load bearing requirements. | Consult pneumatic system design guidelines and material strength charts to select appropriate sheet thickness for the intended application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifolds, Corrosion-Resistant Enclosures, Structural Supports for Pneumatic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||