Engineered for demanding pneumatic systems, this 0.243" thick 304 stainless steel sheet offers superior corrosion resistance and exceptional durability. Its precise dimensions ensure seamless integration into critical industrial assemblies.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.243" |
| Length | 35" |
| Width | 32" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet boasts a substantial thickness of 0.243 inches, a length of 35 inches, and a width of 32 inches. Fabricated from high-grade 304 stainless steel, it exhibits excellent resistance to corrosion, oxidation, and a wide range of chemicals commonly encountered in pneumatic environments. This material's inherent strength and non-magnetic properties make it ideal for applications requiring longevity and reliability under pressure, ensuring consistent performance in aggressive industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material certification against project requirements. 2. Prepare edges for welding or fastening according to design specifications. 3. Integrate sheet into pneumatic assembly, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel in corrosive environments. | Always specify 304 stainless steel or higher for pneumatic components exposed to corrosive substances. |
| Inadequate edge preparation for welding. | Ensure clean, beveled edges for strong, leak-proof welds on stainless steel sheets. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Custom pneumatic valve bodies, Enclosures for pneumatic control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||