This premium 304 stainless steel stock sheet is engineered for high-performance pneumatic applications. Its robust construction and superior material properties ensure reliable operation and longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.621" |
| Length | 43" |
| Width | 40" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength. With precise dimensions of 0.621 inches thickness, 43 inches length, and 40 inches width, it is ideally suited for fabrication of robust pneumatic enclosures, valve manifolds, and structural components. The inherent properties of 304 stainless steel, including its excellent weldability and resistance to a wide range of chemicals and moisture, make it the preferred material for applications exposed to corrosive atmospheres, high humidity, and fluctuating temperatures, ensuring system integrity and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against engineering drawings. 2. Prepare edges for welding or fastening according to fabrication specifications. 3. Install sheet into pneumatic system enclosure or component structure, ensuring secure and leak-free integration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for structural load-bearing requirements. | Always consult the pneumatic system's design specifications and load calculations to select the appropriate sheet thickness for structural integrity. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean all welding surfaces to remove any oils, grease, or contaminants. Use appropriate stainless steel cleaning agents and tools. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Enclosures for pneumatic actuators and valves, Custom manifold block construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||