This robust 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, ideal for critical components in pneumatic systems operating under challenging conditions.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 18" |
| Width | 46" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet measures 0.996 inches thick, 18 inches in length, and 46 inches in width. Fabricated from premium 304 stainless steel, it provides exceptional resistance to corrosion, oxidation, and a wide range of chemicals, making it suitable for exposure to moisture, aggressive media, and fluctuating temperatures. Its high tensile strength ensures structural integrity and longevity in high-pressure pneumatic applications, preventing premature failure and maintaining system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against system requirements. 2. Carefully cut and machine the sheet to the desired component specifications using appropriate tooling for stainless steel. 3. Deburr all edges thoroughly to prevent particulate contamination within pneumatic lines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic enclosures in corrosive environments. | Always select stainless steel, specifically grade 304 or higher, for components exposed to corrosive elements to prevent premature rust and system failure. |
| Inadequate edge finishing after cutting. | Thoroughly deburr all cut edges to prevent the generation of metal fines that can clog pneumatic valves and damage seals. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold blocks, Pressure vessel components, Cylinder end caps and bodies, Valve housings, Air treatment unit enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||