This 0.207-inch thick 304 stainless steel stock sheet, measuring 32x38 inches, is engineered for robust performance in pneumatic applications, offering superior corrosion resistance and longevity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.207" |
| Length | 32" |
| Width | 38" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet provides a critical component for high-integrity pneumatic systems. The material's inherent properties, including its excellent corrosion resistance to a wide range of chemicals and its mechanical strength, make it ideal for demanding environments. The precise dimensions of 0.207" thickness, 32" length, and 38" width ensure consistent fit and reliable performance in fabrication and assembly. Its non-magnetic nature and smooth surface finish further contribute to its suitability for sensitive pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface integrity of the sheet against design specifications. 2. Cut or form the sheet to the required pneumatic component geometry using appropriate tooling. 3. Ensure all edges are deburred and cleaned to prevent particulate contamination within pneumatic lines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for pressure vessels. | Always consult pneumatic system design standards and select material thickness that meets or exceeds pressure and safety requirements. |
| Introducing contaminants during fabrication. | Maintain a clean work environment and use dedicated tooling to prevent debris from entering pneumatic components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Custom pneumatic valve bodies, Corrosion-resistant pneumatic enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||