Engineered for robust pneumatic systems, this 304 stainless steel sheet offers exceptional corrosion resistance and structural integrity. Its precise dimensions ensure seamless integration into critical components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.711" |
| Length | 31" |
| Width | 21" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet provides superior performance in corrosive and high-pressure pneumatic environments. With a nominal thickness of 0.711 inches (18.06 mm), a length of 31 inches (787.4 mm), and a width of 21 inches (533.4 mm), it meets stringent industry standards. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and pitting, make it ideal for components such as air tanks, valve bodies, and manifold blocks where longevity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design requirements. 2. Clean surfaces thoroughly to remove any contaminants before fabrication. 3. Fabricate components according to approved engineering drawings, ensuring proper welding or joining techniques for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for pneumatic tanks. | Always specify 304 stainless steel or equivalent for its superior corrosion resistance and pressure handling capabilities. |
| Inadequate surface preparation before welding. | Thoroughly clean all surfaces to be joined, removing grease, oil, and any foreign matter to ensure a strong, corrosion-resistant weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Air Reservoirs, Compressed Air Manifolds, Valve Housings and Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||