This 304 Stainless Steel stock sheet, precisely manufactured to 0.017-inch thickness, offers superior corrosion resistance and durability essential for high-performance pneumatic systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.017" |
| Length | 44" |
| Width | 33" |
Specified by design engineers worldwide, this 304 stainless steel sheet (ASTM A240 Type 304) offers exceptional tensile strength and ductility, crucial for pneumatic component fabrication. Its 0.017-inch gauge, coupled with dimensions of 44 inches in length and 33 inches in width, allows for efficient blanking and forming of complex geometries. The inherent passivation layer of 304 stainless steel provides robust protection against a wide range of corrosive media and atmospheric conditions commonly encountered in industrial pneumatic environments, ensuring long-term operational integrity and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired cut lines on the sheet. 2. Utilize appropriate cutting tools (e.g., laser, waterjet, or shear) to achieve precise dimensions, minimizing burrs. 3. Deburr all cut edges thoroughly to prevent potential damage to seals or pneumatic components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools that result in excessive burrs or deformation. | Employ precision cutting equipment and ensure thorough deburring of all edges to maintain dimensional accuracy and prevent component wear. |
| Exposing the sheet to incompatible chemicals or environments that can compromise the stainless steel's passivation layer. | Verify material compatibility with the intended operating environment and implement appropriate protective measures if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic cylinder components, Pneumatic manifold fabrication, Diaphragm construction in pneumatic valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||