This premium 304 stainless steel stock sheet provides superior corrosion resistance and mechanical strength, essential for demanding pneumatic applications. Its robust construction ensures longevity in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.775" |
| Length | 25" |
| Width | 35" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers exceptional durability and resistance to corrosion, vital for pneumatic components. Measuring 0.775 inches in thickness, with a length of 25 inches and a width of 35 inches, this material conforms to ASTM A240 standards, ensuring consistent material properties. Its non-magnetic nature and excellent formability make it suitable for fabricating enclosures, manifolds, and structural supports within pneumatic systems where hygiene and chemical inertness are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Fabricate to required dimensions using appropriate cutting and forming tools for stainless steel. 3. Deburr all edges to prevent material fatigue and ensure smooth operation of mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel for environments prone to moisture, chemicals, or saltwater spray to prevent premature corrosion and failure. |
| Improper edge finishing after cutting. | Thoroughly deburr all cut edges to eliminate stress concentrators and potential points for particle generation within the pneumatic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Enclosure Fabrication, Custom Manifold Construction, Structural Supports for Pneumatic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||