This 304 stainless steel sheet is engineered for robust pneumatic systems. Its superior corrosion resistance and dimensional stability ensure reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.916" |
| Length | 30" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 0.916-inch thick, 30-inch by 37-inch sheet is fabricated from high-grade 304 stainless steel. This austenitic alloy offers exceptional resistance to a wide range of corrosive media commonly found in pneumatic circuits, including moisture and certain industrial chemicals. Its inherent strength and dimensional stability prevent warping or deformation under pressure fluctuations, making it ideal for fabricating custom housings, manifolds, and structural components for pneumatic control panels, valve assemblies, and air treatment units where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Align the sheet precisely according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing methods as dictated by the pneumatic system's design parameters.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor sealing. | Thoroughly degrease and dry all contact surfaces before installation to ensure a hermetic seal. |
| Over-tightening fasteners, causing material distortion. | Utilize torque wrenches to apply fasteners to recommended specifications, preventing stress concentrations and material compromise. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Custom manifold construction, Air treatment unit components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||