Engineered from premium 304 stainless steel, this stock sheet provides superior corrosion resistance and structural integrity for critical pneumatic system components and enclosures.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 19" |
| Width | 29" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.806 inches thick, 19 inches in length, and 29 inches in width. The 304 alloy offers an optimal balance of chromium and nickel, ensuring excellent resistance to a wide range of corrosive media prevalent in pneumatic environments, including moisture, oils, and mild acids. Its inherent strength and durability make it ideal for fabricating robust housings, valve manifolds, and structural supports within pneumatic assemblies where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris before fabrication. 2. Utilize appropriate cutting and forming tools designed for stainless steel. 3. Follow standard welding or fastening procedures for 304 stainless steel when assembling components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel that corrodes in humid pneumatic environments. | Always specify 304 stainless steel or higher for guaranteed corrosion resistance in pneumatic applications. |
| Improper handling leading to surface contamination or scratches. | Handle with care, using gloves and avoiding abrasive contact to maintain the pristine surface finish essential for sealing and corrosion prevention. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Custom pneumatic enclosure construction, High-pressure pneumatic manifold bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||