This 304 stainless steel stock sheet provides robust material for custom pneumatic component fabrication. Its inherent corrosion resistance and strength ensure longevity in demanding industrial applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.222" |
| Length | 32" |
| Width | 22" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a precise thickness of 0.222 inches, a length of 32 inches, and a width of 22 inches. The 304 stainless steel alloy offers superior corrosion resistance, particularly against a wide range of atmospheric and chemical agents commonly found in pneumatic environments. This material exhibits excellent formability and weldability, making it ideal for fabricating custom housings, manifolds, and structural components for pneumatic machinery and systems operating under moderate pressure and temperature variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the sheet metal for cutting and shaping according to design specifications. 2. Fabricate components using appropriate welding, bending, and machining techniques. 3. Perform thorough quality inspection and deburring before integration into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel which will corrode rapidly in moist pneumatic environments. | Always select stainless steel, preferably 304 or higher grades, for components exposed to potential moisture or corrosive gases. |
| Inadequate edge preparation leading to weak welds or compromised structural integrity. | Ensure all edges are clean, beveled (if necessary), and free from contaminants before welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Housings for pneumatic valves and actuators, Structural supports for pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||