Engineered from high-grade 304 stainless steel, this stock sheet offers superior corrosion resistance and mechanical strength. Ideal for custom pneumatic component fabrication where reliability and longevity are paramount.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.260" |
| Length | 23" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.260 inches in thickness, with a length of 23 inches and a width of 19 inches. The 304 stainless steel alloy (UNS S30400) provides excellent resistance to a broad range of corrosive environments, including atmospheric, chemical, and food processing applications. Its high tensile strength and formability make it suitable for fabricating robust pneumatic enclosures, manifolds, and internal components that require structural integrity and resistance to operational stresses and potential media exposure. This material's non-magnetic properties further enhance its suitability for sensitive pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design requirements. 2. Carefully cut to size using appropriate fabrication tools (e.g., laser cutter, waterjet). 3. Deburr all edges to prevent contamination and ensure smooth operation of adjacent components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel not rated for the specific pneumatic media. | Always confirm the material's chemical compatibility with the intended pneumatic gas or fluid before fabrication. |
| Inadequate edge finishing leading to burrs. | Thoroughly deburr all cut edges to prevent particle generation within the pneumatic system and potential seal damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Enclosures for pneumatic control systems, Internal components for high-pressure pneumatic cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||