This robust 304 stainless steel stock sheet is engineered for demanding pneumatic applications. Its superior corrosion resistance and mechanical strength ensure longevity and reliability in harsh industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.671" |
| Length | 21" |
| Width | 34" |
A high-performance industrial component, this 304 stainless steel stock sheet is precisely manufactured to specifications of 0.671 inches thickness, 21 inches in length, and 34 inches in width. The 304 grade offers excellent resistance to a broad spectrum of corrosive media commonly found in pneumatic systems, including mild acids and alkalis, as well as food and beverage applications. Its tensile strength and ductility make it suitable for fabrication into housings, manifolds, and structural elements subjected to moderate pressure and mechanical stress. This material is non-magnetic in its annealed condition and exhibits good formability and weldability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not rated for the specific corrosive environment. | Always verify the material grade's chemical resistance against the anticipated media exposure in your pneumatic system. |
| Inadequate support structure leading to deflection or stress concentrations. | Design the supporting framework to adequately distribute load and prevent excessive bending or deformation of the sheet. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Enclosures for pneumatic control panels, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||