This 304 stainless steel stock sheet, measuring 0.187 inches thick by 12 inches wide and 47 inches long, is engineered for robust pneumatic applications. Its superior corrosion resistance and mechanical strength ensure reliable performance in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.187" |
| Length | 12" |
| Width | 47" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet offers exceptional dimensional accuracy for critical pneumatic component fabrication. The 0.187" thickness provides excellent rigidity and durability, while the 12" x 47" dimensions allow for efficient material utilization. 304 stainless steel is inherently resistant to corrosion and oxidation, making it ideal for environments exposed to moisture, chemicals, or high temperatures commonly found in pneumatic systems. Its high tensile strength and yield strength contribute to the longevity and integrity of fabricated parts, ensuring consistent operational efficiency and minimal maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully cut the 304 stainless steel sheet to the required dimensions using appropriate metalworking tools. 2. Fabricate pneumatic components by bending, stamping, or machining the sheet to precise specifications. 3. Ensure all fabricated parts are deburred and cleaned thoroughly before assembly into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify and use 304 stainless steel or equivalent for its inherent corrosion resistance, preventing premature failure and contamination. |
| Insufficient material thickness for the intended pneumatic pressure. | Select sheet thickness based on calculated stress loads and pressure ratings for the specific pneumatic application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Enclosures for pneumatic control panels, Components for pneumatic actuators and cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||