This 0.818-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity, making it ideal for critical pneumatic system components and fabrication.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.818" |
| Length | 24" |
| Width | 19" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a thickness of 0.818 inches, a length of 24 inches, and a width of 19 inches. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and high temperatures, ensure longevity and consistent performance in demanding pneumatic environments. This material is crucial for fabricating robust housings, structural supports, and custom components subjected to harsh operational conditions, moisture, and chemical exposure within pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare cutting and fabrication equipment for precise material handling and shaping. 3. Install fabricated components according to pneumatic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel susceptible to corrosion. | Always specify and verify 304 stainless steel for pneumatic applications requiring corrosion resistance. |
| Inadequate tolerance control during fabrication. | Employ precise machining and cutting techniques to maintain tight tolerances essential for pneumatic sealing. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Corrosion-resistant pneumatic enclosures, Custom pneumatic component manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||