This robust 304 stainless steel stock sheet is engineered for the rigorous demands of pneumatic systems. Its superior corrosion resistance and mechanical strength ensure reliable performance in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.412" |
| Length | 16" |
| Width | 44" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, vital for pneumatic components. Measuring 0.412 inches thick, 16 inches in length, and 44 inches in width, it meets stringent material standards for high-pressure and corrosive environments. The inherent properties of 304 stainless steel, including its high tensile strength and excellent weldability, make it ideal for fabricating custom enclosures, mounting brackets, and structural elements within pneumatic control panels and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity before cutting. 2. Utilize appropriate cutting tools (e.g., plasma cutter, waterjet) for precise fabrication. 3. Smooth all edges to prevent material fatigue and ensure safe handling during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always select 304 stainless steel or equivalent for superior corrosion resistance, preventing premature component failure and system downtime. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and polish all cut edges to eliminate stress risers and improve the longevity of fabricated pneumatic parts. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Control Panel Fabrication, Custom Enclosures for Actuators, Mounting Brackets for Pneumatic Valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||