This 304 stainless steel stock sheet is engineered for the rigorous demands of pneumatic systems. Its robust construction ensures longevity and reliable performance in corrosive environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.269" |
| Length | 17" |
| Width | 41" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance, crucial for pneumatic system integrity. With precise dimensions of 0.269 inches (6.83 mm) in thickness, 17 inches (431.8 mm) in length, and 41 inches (1041.4 mm) in width, it is optimized for fabrication of robust pneumatic components, enclosures, and structural elements. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and attack from many industrial chemicals, make it ideal for environments where moisture, aggressive media, or hygienic requirements are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the sheet to required dimensions using appropriate cutting and shaping tools. 2. Deburr all edges to ensure smooth transitions and prevent potential damage to seals or other components. 3. Integrate the fabricated parts into the pneumatic system, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not suited for corrosive pneumatic environments. | Always specify 304 stainless steel or higher for pneumatic applications exposed to moisture or chemicals. |
| Inadequate edge finishing, leading to seal compromise. | Thoroughly deburr and polish all cut edges to prevent leakage and damage to sealing surfaces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Enclosures for pneumatic actuators and valves, Structural supports for pneumatic piping and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||