This 304 stainless steel stock sheet is engineered for demanding pneumatic applications. Its robust construction ensures longevity and resistance to corrosive environments, making it a reliable choice for critical system components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.151" |
| Length | 45" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.151 inches in thickness, 45 inches in length, and 40 inches in width. Composed of a robust austenitic alloy, it offers exceptional corrosion resistance, particularly against a wide range of chemicals and atmospheric agents commonly found in industrial pneumatic systems. The inherent strength and formability of 304 stainless steel allow for intricate fabrication of housings, manifolds, and structural elements that demand both mechanical integrity and hygienic properties. Its non-magnetic nature further enhances its suitability for sensitive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against design specifications. 2. Prepare cutting and forming tools for precise fabrication according to required component geometry. 3. Deburr all cut edges thoroughly to prevent particulate contamination within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always select 304 stainless steel or a higher-grade alloy for applications exposed to moisture, chemicals, or high humidity to prevent rust and contamination. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all edges to eliminate sharp fragments that could be dislodged and enter the pneumatic circuit, potentially causing damage or system malfunction. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Housings for pneumatic actuators and valves, Corrosion-resistant pneumatic system enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||