Engineered for superior performance in challenging pneumatic environments. This 304 stainless steel sheet offers exceptional durability, corrosion resistance, and structural integrity for critical applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.746" |
| Length | 15" |
| Width | 37" |
Purpose-built for heavy-duty applications, this 0.746-inch thick, 15-inch by 37-inch stock sheet is manufactured from premium 304 stainless steel. Its austenitic structure provides excellent resistance to a wide range of corrosive media commonly found in industrial pneumatic systems, including moisture, mild acids, and alkalis, preventing premature degradation and ensuring long-term operational reliability. The sheet's robust gauge and high tensile strength make it ideal for fabricating pressure vessels, housing components, structural supports, and other critical parts that require exceptional mechanical stability and protection against environmental factors. This material is compliant with relevant industry standards for pneumatics, ensuring seamless integration and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to fabrication. 2. Cut and machine to precise specifications for intended pneumatic component. 3. Ensure all edges are deburred and surfaces are clean before assembly into pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure pneumatic applications. | Always select a material gauge that exceeds the calculated pressure and stress requirements of the pneumatic system to prevent catastrophic failure. |
| Inadequate surface preparation leading to premature corrosion. | Thoroughly clean and degrease all surfaces of the 304 stainless steel sheet before and after fabrication to remove contaminants that can initiate corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Cylinder Housings, Pressure Vessel Fabrication, Air Reservoir Construction, Pneumatic Manifold Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||