This premium 0.576-inch thick, 25x47 inch 304 stainless steel stock sheet is engineered for rigorous pneumatic systems. Its superior corrosion resistance and mechanical integrity ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 25" |
| Width | 47" |
Trusted by engineers across multiple sectors, this 0.576" thick, 25" long, and 47" wide 304 stainless steel sheet offers exceptional durability and corrosion resistance, crucial for pneumatic applications exposed to harsh chemicals or moisture. The inherent properties of 304 stainless steel, including its austenitic microstructure, provide excellent formability and weldability, allowing for custom fabrication of critical components. This material's non-magnetic nature and resistance to pitting and crevice corrosion make it ideal for maintaining system purity and longevity in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Safely cut and form sheet to precise pneumatic component specifications using appropriate industrial tooling. 3. Ensure all edges are deburred and surfaces are cleaned to prevent contamination before integration into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for high-pressure pneumatic lines. | Always consult pneumatic system pressure ratings and select sheet thickness that meets or exceeds calculated burst strength requirements. |
| Inadequate surface preparation leading to premature corrosion or leaks. | Thoroughly clean all surfaces after fabrication, removing any cutting fluids, debris, or contaminants before assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Custom pneumatic valve bodies, Enclosures for pneumatic controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||