This 304 stainless steel stock sheet is engineered for critical pneumatic systems requiring superior corrosion resistance and mechanical integrity. Its substantial dimensions offer versatility for custom fabrication and robust component creation.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.945" |
| Length | 41" |
| Width | 32" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.945 inches in thickness, 41 inches in length, and 32 inches in width. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and a wide range of corrosive media, make it ideal for environments where chemical exposure or high humidity is prevalent within pneumatic circuits. This material's formability and weldability further facilitate its integration into complex pneumatic manifold designs, enclosures, and structural components, ensuring long-term performance and reliability in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Cut to desired dimensions using appropriate abrasive or plasma cutting equipment. 3. Deburr all edges thoroughly to remove any sharp protrusions and prepare for subsequent processing (e.g., welding, machining).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel or equivalent for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and system failure. |
| Inadequate edge preparation after cutting. | Ensure all cut edges are meticulously deburred to prevent potential damage to seals, hoses, or operator safety during handling and assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifold Fabrication, Corrosion-Resistant Pneumatic Enclosures, Structural Components for High-Humidity Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||