This 304 stainless steel sheet provides exceptional durability and corrosion resistance for critical pneumatic system components. Engineered for robust performance in challenging environments, it ensures reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.549" |
| Length | 40" |
| Width | 13" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers a nominal thickness of 0.549 inches, a length of 40 inches, and a width of 13 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of atmospheric and chemical environments, make it an optimal choice for pneumatic applications exposed to moisture, corrosive gases, or elevated temperatures. This material's high tensile strength and formability also allow for the fabrication of robust and precisely shaped components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or shaping process adheres to precise dimensional requirements for seamless integration. 2. Verify surface integrity for any imperfections that could compromise pneumatic seal performance. 3. Securely fasten the fabricated component within the pneumatic system, ensuring proper alignment and stress distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly shaped components, leading to leaks. | Adhere strictly to specified dimensions and tolerances during fabrication. |
| Compromising surface finish, causing premature wear or seal failure. | Maintain a high-quality surface finish throughout the fabrication process. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Cylinder Housings, Valve Bodies, Piping and Tubing, Enclosures for Pneumatic Controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||