This 304 stainless steel stock sheet is engineered for robust pneumatic applications. Its superior corrosion resistance and mechanical strength ensure reliable performance in challenging industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.951" |
| Length | 43" |
| Width | 33" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet offers exceptional dimensional stability for critical pneumatic component fabrication. With a thickness of 0.951 inches, a length of 43 inches, and a width of 33 inches, it provides ample material for custom manifold blocks, enclosures, and mounting hardware. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of media and its high tensile strength, make it ideal for environments where hygiene, chemical exposure, or temperature fluctuations are prevalent. This material minimizes the risk of contamination and ensures longevity in demanding pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Utilize appropriate cutting and machining techniques for 0.951" thick 304 stainless steel. 3. Ensure all fabricated components are deburred and cleaned before integration into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting tools and maintain strict cleanliness protocols to prevent cross-contamination. |
| Inadequate deburring of cut edges, potentially leading to air leaks or damage to seals. | Thoroughly deburr all edges using appropriate tools and inspect for any sharp or rough areas. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Enclosures for pneumatic control panels, Mounting plates and brackets in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||