Engineered for robust pneumatic systems, this 304 stainless steel stock sheet provides exceptional corrosion resistance and dimensional stability, ensuring reliable performance in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.941" |
| Length | 15" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.941 inches in thickness, 15 inches in length, and 37 inches in width. Composed of austenitic chromium-nickel stainless steel, it exhibits excellent resistance to oxidation and a wide range of corrosive media, making it ideal for compressed air systems, valve bodies, and actuator housings. The material's inherent strength and non-magnetic properties further enhance its suitability for critical pneumatic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting. 2. Utilize appropriate cutting tools for 0.941" thick stainless steel. 3. Deburr all edges thoroughly after cutting to prevent particulate contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting tools and ensure a clean working environment. |
| Insufficient deburring, leaving sharp edges that can damage seals or shed particles into the pneumatic system. | Meticulously deburr all cut edges using a file or deburring tool. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic valve components, Compressed air system manifolds, Actuator housings in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||