This robust 304 stainless steel stock sheet provides exceptional durability and corrosion resistance, making it ideal for critical components within demanding pneumatic systems and environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.881" |
| Length | 43" |
| Width | 46" |
Engineered for reliability and performance, this 0.881-inch thick stock sheet is fabricated from premium 304 stainless steel. Its dimensions of 43 inches in length and 46 inches in width offer ample material for a variety of custom fabrication needs within pneumatic applications. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and corrosion, ensure longevity and structural integrity even in harsh or chemically active environments. This material is well-suited for fabricating housings, structural supports, and other components requiring a high level of hygiene and resistance to contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the 304 stainless steel sheet to the required dimensions for your pneumatic component or system. 2. Perform any necessary forming, bending, or welding operations adhering to best practices for 304 stainless steel. 3. Integrate the fabricated component into the pneumatic system, ensuring all connections are secure and leak-free.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic components in corrosive environments. | Always specify 304 stainless steel or a comparable corrosion-resistant alloy for pneumatic parts exposed to moisture, chemicals, or saltwater. |
| Inadequate material thickness for structural load-bearing pneumatic components. | Carefully calculate the required material thickness based on anticipated loads and stresses. Consult engineering resources if unsure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic cylinder fabrication, Pneumatic control panel enclosures, Corrosion-resistant pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||