This premium 304 stainless steel stock sheet provides exceptional corrosion resistance and structural integrity, ideal for robust pneumatic system components requiring long-term reliability in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 36" |
| Width | 13" |
Engineered for reliability and performance, this 304 stainless steel stock sheet offers superior strength and excellent resistance to corrosive media, making it the material of choice for critical pneumatic components. With dimensions of 0.872 inches thick, 36 inches in length, and 13 inches in width, it meets stringent industry standards. The inherent properties of 304 stainless steel, including its non-magnetic nature and high tensile strength, ensure optimal performance and longevity in high-pressure pneumatic systems, valve bodies, and manifold fabrication where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project requirements. 2. Cut sheet to precise dimensions using appropriate cutting tools for stainless steel. 3. Deburr all edges thoroughly to prevent material fatigue and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic components in corrosive environments. | Always specify 304 stainless steel or a higher grade for pneumatic systems exposed to moisture, chemicals, or saltwater to prevent premature corrosion and system failure. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to eliminate stress risers that can lead to cracking or fatigue failure over time. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold blocks, Cylinder construction, Valve housings, Pneumatic fitting fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||