This 304 stainless steel stock sheet is engineered for critical pneumatic applications. Its robust construction ensures superior performance and longevity in corrosive or high-pressure environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.869" |
| Length | 30" |
| Width | 13" |
Built to exacting engineering tolerances, this 0.869-inch thick, 30-inch long, and 13-inch wide 304 stainless steel sheet provides exceptional dimensional stability. 304 stainless steel offers excellent corrosion resistance, crucial for maintaining the integrity of pneumatic components in environments exposed to moisture, chemicals, or varying temperatures. Its high tensile strength ensures durability under significant pressure, making it ideal for custom manifold fabrication, valve bodies, and pneumatic cylinder components where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Precisely cut and machine the sheet to the required component design using appropriate tooling for stainless steel. 3. Deburr all edges thoroughly to prevent contamination or damage to pneumatic seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 or higher grade stainless steel for applications exposed to moisture, chemicals, or elevated temperatures to prevent premature corrosion and system failure. |
| Inadequate edge finishing after machining. | Ensure all cut edges are thoroughly deburred and smoothed to prevent particulate generation that can damage sensitive pneumatic seals and valves. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifold Fabrication, High-Pressure Pneumatic Valve Bodies, Pneumatic Cylinder Components in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||