This 304 stainless steel stock sheet is engineered for robust pneumatic systems. Its premium material offers exceptional corrosion resistance and durability for demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.866" |
| Length | 38" |
| Width | 30" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.866 inches in thickness, 38 inches in length, and 30 inches in width. Constructed from AISI 304 (1.4301) stainless steel, it provides superior corrosion resistance, vital for pneumatic components exposed to moisture or corrosive media. This material offers excellent mechanical strength and formability, ensuring reliable performance in pressure vessels, enclosures, and fabrication of custom pneumatic manifolds and housings. Its non-magnetic properties further enhance its suitability for sensitive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Verify dimensions and material certification against project requirements. 3. Fabricate and install according to approved engineering drawings and relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for corrosive environments. | Always specify and verify 304 or higher-grade stainless steel for pneumatic applications exposed to moisture or chemicals. |
| Inadequate cutting or forming, leading to stress concentrations. | Utilize appropriate tooling and techniques for cutting and forming stainless steel to maintain its structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic system enclosures, Custom pneumatic manifold fabrication, Pressure vessel construction, Component housings in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||