Engineered for superior performance in demanding pneumatic environments, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance for critical components and structural elements.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.834" |
| Length | 44" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 0.834" thick stock sheet is fabricated from high-grade 304 stainless steel, renowned for its excellent tensile strength, formability, and resistance to a wide range of corrosive media common in industrial pneumatic systems. The 44" length and 28" width provide ample material for fabrication of robust enclosures, mounting brackets, and pressure-bearing components. Its inherent non-magnetic properties and smooth surface finish ensure reliable operation and ease of cleaning in sanitary or chemically aggressive environments. This sheet meets stringent industry standards for material integrity and performance under pressure and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended pneumatic system environment and operational parameters. 2. Accurately cut the sheet to required dimensions using appropriate metalworking tools. 3. Ensure all fabricated components are deburred and cleaned to prevent particulate contamination within the pneumatic circuit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always select stainless steel, specifically 304 or higher grades, for applications exposed to moisture, chemicals, or high humidity to prevent rapid corrosion and component failure. |
| Inadequate material thickness for pressure vessel or structural components. | Consult pneumatic system design specifications and relevant pressure vessel codes (e.g., ASME) to determine the minimum required material thickness for safety and performance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic valve bodies and actuators, Enclosures for pneumatic control panels, Structural support for pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||