This robust 304 stainless steel sheet offers superior corrosion resistance and mechanical integrity, making it ideal for critical components within pneumatic systems. Engineered for demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.811" |
| Length | 30" |
| Width | 14" |
Manufactured under strict quality controls, this 0.811-inch thick, 30-inch long, and 14-inch wide sheet is fabricated from premium 304 stainless steel. This austenitic alloy provides excellent resistance to a wide range of corrosive media, including atmospheric conditions and many industrial chemicals, ensuring longevity in pneumatic applications. Its high tensile strength and formability allow for precise fabrication of enclosures, manifolds, and structural elements within pneumatic machinery and control systems, even under pressure and varying environmental stresses. This material is non-magnetic and exhibits good weldability for complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not suited for corrosive environments. | Always specify 304 stainless steel or higher for pneumatic components exposed to moisture or chemicals. |
| Inadequate edge preparation before welding or forming. | Properly chamfer or prepare edges to ensure full penetration and structural integrity during fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel enclosures, Custom pneumatic manifold fabrication, Structural supports for pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||