This robust 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it the premium choice for critical pneumatic system components. Precisely manufactured for demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.560" |
| Length | 35" |
| Width | 17" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet (ASTM A240 Type 304) delivers exceptional performance in corrosive and high-pressure pneumatic environments. Measuring 0.560 inches in thickness, 35 inches in length, and 17 inches in width, it provides ample material for fabrication of robust pneumatic enclosures, valve bodies, and manifold blocks. The inherent passivation layer of 304 stainless steel ensures long-term resistance to oxidation and attack from various media, maintaining system integrity and operational efficiency. Its excellent formability and weldability facilitate complex component designs. Tensile strength typically ranges from 500-700 MPa, with a yield strength of 200-260 MPa, ensuring structural integrity under significant pneumatic loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Cut sheet to required dimensions using appropriate metal cutting tools, ensuring clean edges. 3. Fabricate components using approved welding or fastening techniques suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel for resistance to rust and chemical degradation, ensuring extended component life and system reliability. |
| Improper edge preparation before welding. | Thoroughly clean and prepare weld edges to remove any contaminants that could compromise the weld integrity and corrosion resistance of the 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic valve bodies, Enclosures for pneumatic control panels, Custom pneumatic manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||