This 304 stainless steel stock sheet is engineered for robust pneumatic systems. Its superior corrosion resistance and durability make it ideal for environments where reliability is paramount.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.468" |
| Length | 19" |
| Width | 38" |
Specified by design engineers worldwide, this 0.468-inch thick, 19-inch by 38-inch sheet of 304 stainless steel offers exceptional strength and chemical inertness. Ideal for constructing durable pneumatic enclosures, manifolds, and custom components, it resists corrosion from common industrial fluids and atmospheric conditions, ensuring long-term performance and minimal maintenance in demanding pneumatic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate metalworking tools. 3. Deburr all edges thoroughly to prevent material fatigue and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Utilize 304 stainless steel for its inherent corrosion resistance, preventing premature failure and contamination. |
| Inadequate edge preparation after cutting. | Always deburr edges thoroughly to eliminate stress risers and improve sealing integrity in pneumatic assemblies. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic Enclosures, Custom Manifold Blocks, Housings for Pneumatic Valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||