This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it ideal for robust pneumatic systems. Precisely manufactured for demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.392" |
| Length | 47" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.392-inch thick 304 stainless steel sheet measures 47 inches in length and 43 inches in width. The austenitic 304 stainless steel alloy provides excellent resistance to corrosion, oxidation, and a wide range of chemicals, ensuring longevity in harsh pneumatic environments. Its high tensile strength and formability allow for fabrication into custom components for pressure vessels, enclosures, and structural elements within pneumatic machinery, contributing to operational reliability and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare cutting and forming equipment to accommodate the specified thickness and material. 3. Perform fabrication operations, ensuring all edges are deburred and cleaned.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel that is susceptible to corrosion in the intended pneumatic environment. | Always specify and verify 304 stainless steel (or higher grade if required) for critical pneumatic components to ensure long-term performance and prevent premature failure due to oxidation or chemical attack. |
| Inadequate edge preparation after cutting, leading to stress risers or potential leak paths. | Thoroughly deburr and smooth all cut edges to eliminate imperfections that could compromise the integrity of the fabricated pneumatic components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic pressure vessel fabrication, Custom pneumatic enclosure construction, Structural components for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||