This robust 304 stainless steel stock sheet is engineered for critical pneumatic systems. Its superior corrosion resistance and precise dimensions ensure reliability in harsh industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.300" |
| Length | 18" |
| Width | 34" |
Trusted by engineers across multiple sectors, this 0.300-inch thick, 18-inch by 34-inch 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, vital for pneumatic components. Fabricated from AISI 304 stainless steel, it provides excellent strength and a smooth surface finish, minimizing friction and wear in dynamic systems. Its chemical composition ensures immunity to a wide range of corrosive media commonly encountered in industrial pneumatic applications, making it ideal for demanding environments where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress concentration and potential failures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for its inherent corrosion resistance in pneumatic systems exposed to moisture or chemicals. |
| Neglecting edge finishing after cutting. | Thoroughly deburr and smooth all cut edges to maintain structural integrity and prevent premature wear. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Custom cylinder construction, Enclosure panels for pneumatic controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||