This 304 stainless steel stock sheet is engineered for robust performance in challenging pneumatic systems. Its superior corrosion resistance and mechanical integrity ensure reliable operation and extended service life in demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.290" |
| Length | 35" |
| Width | 33" |
A high-performance industrial component, this 304 stainless steel stock sheet offers exceptional durability for pneumatic applications. Measuring 0.290 inches in thickness, 35 inches in length, and 33 inches in width, it is fabricated from grade 304 stainless steel, renowned for its excellent corrosion resistance against a wide range of chemicals and atmospheric conditions. This material's inherent strength and formability make it ideal for custom fabrication of pneumatic enclosures, manifold blocks, and specialized component housings where hygiene and resistance to environmental degradation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, level, and free of debris. 2. Accurately mark the desired cutting and drilling locations on the sheet using appropriate layout tools. 3. Cut and drill the sheet to the required specifications using industrial-grade cutting and drilling equipment suitable for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or drilling. | Utilize carbide-tipped or high-speed steel tooling specifically designed for working with stainless steel to prevent galling and ensure clean cuts. |
| Inadequate surface preparation before mounting. | Thoroughly clean and degrease both the sheet surface and the mounting area to ensure proper adhesion and prevent contamination of the pneumatic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic system enclosures, Custom manifold fabrication, Component mounting plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||