This 304 stainless steel stock sheet is engineered for the rigorous demands of pneumatic applications. Offering superior corrosion resistance and mechanical strength, it ensures reliable performance in challenging industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.166" |
| Length | 17" |
| Width | 38" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet measures 0.166 inches thick, 17 inches in width, and 38 inches in length. Fabricated from AISI 304 stainless steel, it boasts excellent corrosion resistance, particularly against atmospheric and many organic/inorganic chemicals, making it ideal for environments prone to moisture or aggressive media. Its inherent strength and durability ensure structural integrity in pneumatic component fabrication, supporting components under pressure and stress. This material is non-magnetic in its annealed state and offers good formability and weldability, facilitating custom component manufacturing for pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines accurately on the sheet based on design specifications. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter, waterjet) to achieve precise dimensions. 3. Deburr all cut edges to prevent material fatigue and ensure smooth interfacing with other components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel where corrosion resistance is critical. | Always specify and use 304 stainless steel for pneumatic components exposed to moisture or corrosive elements. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all edges to remove sharp points and prevent stress concentrations, which can lead to premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Enclosure construction for pneumatic controls, Custom bracketry and mounting solutions for pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||