This 304 stainless steel stock sheet is engineered for pneumatic systems requiring superior corrosion resistance and structural integrity. Its robust dimensions and material properties ensure reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.970" |
| Length | 37" |
| Width | 39" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet offers exceptional dimensional accuracy with a thickness of 0.970 inches, a length of 37 inches, and a width of 39 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance, high tensile strength, and formability, make this material ideal for constructing pneumatic component housings, enclosures, and structural elements. Its non-magnetic nature and ability to withstand moderate temperatures further enhance its suitability for a wide array of industrial pneumatic applications where hygiene and resistance to harsh chemicals are paramount. This sheet provides a robust foundation for fabricating custom pneumatic solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design specifications. 2. Prepare sheet edges for cutting or forming using appropriate machining techniques. 3. Fabricate components according to design requirements, ensuring proper weld or joining procedures for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel or a higher-grade alloy for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and component failure. |
| Inadequate edge preparation before cutting or forming. | Ensure all edges are properly deburred and cleaned to prevent stress concentrations and ensure smooth material flow during subsequent fabrication processes. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel enclosures, Custom pneumatic valve manifolds, Corrosion-resistant pneumatic cylinder components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||