This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it ideal for fabricating robust components within demanding pneumatic systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.037" |
| Length | 38" |
| Width | 27" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet provides exceptional durability and resistance to corrosion, ideal for pneumatic system components. Measuring 0.037 inches in thickness, 38 inches in length, and 27 inches in width, it meets stringent material requirements for applications exposed to moisture, chemicals, and moderate pressures. The inherent passivation layer of 304 stainless steel ensures longevity and reliability in harsh operational conditions, preventing premature degradation and maintaining system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface preparation by cleaning and degreasing the sheet edges and mating surfaces. 2. Fabricate components according to design specifications, adhering to precision tolerances. 3. Integrate fabricated parts into the pneumatic system, performing thorough leak testing upon completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always specify 304 stainless steel for pneumatic components exposed to moisture or chemical agents to prevent rust and premature failure. |
| Inadequate edge preparation leading to stress risers. | Properly deburr and smooth all cut edges to prevent potential crack propagation under operational stress. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Custom actuator housings, Pressure vessel components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||