This 304 stainless steel stock sheet is engineered for superior performance in pneumatic systems. Its inherent corrosion resistance and mechanical strength make it an ideal choice for critical components.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.107" |
| Length | 40" |
| Width | 41" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers exceptional performance characteristics. The material grade 304, known for its excellent corrosion resistance and weldability, is critical for pneumatic applications exposed to moisture or corrosive agents. With a precise thickness of 0.107 inches, a length of 40 inches, and a width of 41 inches, this sheet provides a substantial surface area for fabrication of enclosures, mounting brackets, or structural elements within pneumatic control panels and machinery. Its tensile strength and formability ensure reliable integration into complex systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the sheet for any surface defects or damage. 2. Cut the sheet to the required dimensions using appropriate metal cutting tools. 3. Prepare edges for welding or fastening according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel for its superior corrosion resistance in wet or chemically active pneumatic systems. |
| Insufficient material thickness for structural integrity. | Verify that the 0.107" thickness meets the calculated load-bearing requirements for your pneumatic system components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Enclosures for pneumatic actuators, Mounting plates for pneumatic valves and regulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||