This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it an ideal material for components within demanding pneumatic systems. Its robust construction ensures longevity and reliability in challenging industrial settings.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.135" |
| Length | 22" |
| Width | 47" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet provides exceptional durability. Measuring 0.135 inches in thickness, 22 inches in width, and 47 inches in length, it meets stringent material specifications for pneumatic applications. The 304 stainless steel alloy offers excellent resistance to corrosion, oxidation, and a wide range of chemicals, ensuring component integrity and extended service life even in aggressive atmospheres. This material is well-suited for fabricating housing, mounting brackets, enclosures, and other critical parts within pneumatic control panels and equipment where hygiene and environmental resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the sheet for any damage or surface imperfections before fabrication. 2. Utilize appropriate cutting and forming tools designed for stainless steel to achieve precise dimensions. 3. Ensure all fabricated components are deburred and cleaned to prevent particulate contamination in pneumatic lines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic enclosures in corrosive environments. | Always specify 304 or higher grade stainless steel for pneumatic components exposed to moisture, chemicals, or saltwater to prevent rust and premature failure. |
| Insufficient material thickness leading to component flex or deformation. | Verify the required material thickness based on the load-bearing requirements and operating pressures of the pneumatic system to ensure structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Custom housing for pneumatic actuators and valves, Mounting plates for pneumatic cylinders and sensors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||