This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, ideal for demanding pneumatic system components requiring durability and hygiene.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.631" |
| Length | 32" |
| Width | 19" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet (0.631" thick, 32" length, 19" width) provides exceptional durability and resistance to corrosion and oxidation, crucial for pneumatic applications in harsh environments such as food processing, chemical handling, and marine settings. Its robust composition ensures longevity and reliable performance under pressure and exposure to various media. The material's inherent passivity and low magnetic permeability further enhance its suitability for sensitive pneumatic controls.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Machine to precise dimensions according to pneumatic component schematics. 3. Deburr all cut edges to prevent particle generation within pneumatic lines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel susceptible to rust in corrosive environments. | Always specify 304 or higher grade stainless steel for pneumatic components exposed to moisture or chemicals. |
| Inadequate edge finishing leading to particulate contamination. | Thoroughly deburr and polish all cut and machined edges to maintain pneumatic system purity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic cylinder housings, Air manifold blocks, Control valve bodies, Pneumatic fitting fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||