This 0.259" thick 304 stainless steel stock sheet, measuring 37" x 46", offers superior corrosion resistance and mechanical strength, ideal for robust electrical enclosures and lighting fixtures.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.259" |
| Length | 37" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet provides exceptional dimensional stability and structural integrity. Its 0.259" thickness, combined with a 37" length and 46" width, ensures suitability for fabricating custom electrical enclosures, junction boxes, and heavy-duty lighting support structures. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and a wide range of corrosive agents, make it a preferred material in environments where reliability and longevity are paramount, such as industrial settings, outdoor installations, and marine applications. This sheet conforms to industry standards for material composition and mechanical performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Safely handle and position the sheet using appropriate lifting equipment. 2. Accurately measure and mark cut lines according to design specifications. 3. Fabricate and install using approved welding, cutting, and fastening techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or fabrication, leading to contamination and potential rust. | Employ dedicated stainless steel cutting tools and ensure all fabrication equipment is thoroughly cleaned to prevent cross-contamination. |
| Improper handling leading to scratches or dents that compromise the aesthetic and protective surface. | Utilize protective films or coverings during handling and fabrication. Avoid dragging the sheet across abrasive surfaces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Industrial Lighting Fixture Housings, Outdoor Junction Boxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||