This 304 stainless steel stock sheet is engineered for superior performance in lubricating systems. Its precise dimensions and material integrity ensure reliable operation and longevity in rigorous industrial applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.425" |
| Length | 37" |
| Width | 35" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. With a thickness of 0.425 inches, a length of 37 inches, and a width of 35 inches, it meets stringent ASTM A240 standards. The inherent passivity of 304 stainless steel makes it ideal for components in lubricating fluid pathways, pump housings, and filtration systems where chemical inertness and resistance to wear are paramount for maintaining fluid purity and system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the sheet, aligning all mounting holes with pre-drilled or designated locations. 3. Secure the sheet using appropriate fasteners, ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel in highly corrosive lubricating environments. | Verify the specific grade of stainless steel (e.g., 304, 316) is rated for the chemical composition and operating temperature of the lubricant. |
| Improper fastener selection leading to galvanic corrosion. | Utilize fasteners made from compatible materials, ideally the same grade of stainless steel or a material with a higher nobility. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricating system components, Fluid handling manifolds, Pump and valve housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||